Specifying the Orientation and Character Direction
The orientation (Vert/Hor) and text direction (Vert char/Hor char) are specified in the "Orientation" settings. The default setting is set to
"Hor/Hor char. "
SETTING
Hor/Hor char (Default Setting)
Vert/Vert char
Vert/Hor char
[Example] Set to "Vert/Vert char. "
1
Display the page for which you want
to change the orientation.
2
Press
the [
] key.
3
Select "Page"
with [ ] or [ ]
•
If you select "All" in this screen, the orientation of all pages
will be changed.
Orientation
Hor/Hor char
Vert/Vert char
Vert/Hor char
4
Use [
] or [
to select "Vert/Vert char. "
Orientation
Hor/Hor char
Vert/Vert char
Vert/Hor char
34
Orientation: horizontal
Text direction: horizontal
Orientation: vertical
Text direction: vertical
Orientation: vertical
Text direction: horizontal
Page
/All
|
|
123
|
|
|
|
]
Page
/All
|
|
123
|
|
|
|
DETAILS
5
Press
the [Enter] key.
•
The display returns to the character input display.
•
The orientation settings can be checked on the display.
■
NOTE
•
The orientation can be set for each page.
•
If you change the orientation, a confirmation message will
appear if any characters do not fit within the page. To cancel
the changes, select "No. "
•
If you want to set the orientation to "Vert/Hor char, " set the
orientation before entering text. It is not possible to specify
"Vert/Hor char" for the text you input.
•
If you set the orientation to "Vert/Hor char, " the settings will
be as follows.
- The character space is set to "Narrow" and cannot be
changed.
- The text will be printed centered even if the alignment is
set to "Even Distribution. "
- Regardless of the "All Line Centering" setting, all lines will
be centered and printed.
- The center line will not be printed regardless of the Center
Line setting.
PRINT IMAGE
12V
Pump Room
24V
/
V V
C1