Table of Contents
Advertisement
CHANGING THE PRINTER SETTINGS
Changing the Auto Power Off Settings (Adapter/Battery)
Change the amount of time that the unit will automatically turn off
after a certain period of inactivity. The auto power off setting can
be set for each power source used, and the default setting for
both is "30 min. "
1
Press
the [Settings] key.
2
Use [
] or [
and press the [Enter] key.
S et t in g s
P r i n t adj us t
S et t ing
O t h er s
3
Use [
] or [
"AutoOff (battery)"), and then press the [Enter] key.
Ot h er s
Clear tube reverse
AutoO (adapter)
AutoO (battery)
4
Use [
] or [
is automatically turned o, and then press the
[Enter] key.
AutoO (adapter)
5 min.
15 min.
30 min.
•
You can select the timer setting from "No, " "5 min., " "15 min., "
and "30 min. "
5
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
92
] to select "Others"
] to select "AutoOff (adapter)" (or
] to select the time until the power
IMPORTANT
•
In the following cases, the automatic power off function will
not work.
- When an error has occurred.
- When the cover is open.
•
The time will be reset when you switch the power source
used.
•
If the set time elapses without receiving data while
connected to a PC or Bluetooth, the power will automatically
turn off.
Advertisement
Table of Contents
