Display (Input Screen) - Partex ProMark MK9 Quick Start Manual

DISPLAY (INPUT SCREEN)

The meanings of each indication in the [INPUT screen] are as follows.
1
SHIFT
2
PRT/PITCH
3
PITCH CUT
4
BLOCK No.
5
INPUT screen
6
STATUS display
7
REPEAT
8
C/SPACE
9
C/WIDTH
10
C/SIZE
11
FRAME
12
VRT
13
LOCK
Quick Start
Displays when "SHIFT" is "ON."
[PITCH PRINT MODE]: Displays the "PITCH
LENGTH."
[NORMAL PRINT MODE]: Displays the "PRINT
LENGTH."
Displays the way of the "PITCH CUTTING."
Displays the "BLOCK No. " on the cursor.
Displays the characters entered and the edit marks.
The upper field displays the status of the sequential
number if it has been set. The lower field displays
the object of the printing selected.
Displays the repeating numbers of the block on the
cursor.
Displays the space between characters of the block
on the cursor.
Displays the character width of the block on the
cursor.
Displays the character size of the block on the
cursor.
Displays when the framing is "ON."
Displays when the vertical printing has been set.
Displays when "LOCK" is "ON.".
Indicates the pitch printing.
Indicates the block. Up to 100 blocks can be input
in an entire document
Indicates that the line has been changed.
(Printing on a tube/profile) Only 1 line can be set.
(Printing on a tape) Up to 4 lines can be set, in case
of 12mm tape
Indicates the setting of sequential numbers
Doc:
MK9-M-04-02
23
Sidan/ Page: