Table of Contents
Advertisement
14
[Settings] key
All functions can be set using this key.
15
[Del All] key
Deletes the currently entered characters and settings. (P.31)
16
[Ins] key
Switches between Insert mode and Overwrite mode. (P.29)
17
[Del] key
Deletes the character selected by the cursor.
18
[Canc] key
Press this key while printing to stop printing, and then stop after cutting
the print media. If you press and hold the power key for 2 seconds
or more, the printer will stop without cutting. If pressed during the
operation of a function, the operation will be canceled. Also, pressing
this key while holding down [Shift] will return you to the character
input display.
19
[Back Space] key
Deletes the character to the left of the cursor position.
20
[Enter] key
Confirm the input of unconfirmed characters or selected items.
Pressing this key after finalizing text input will insert a page break at
the cursor position.
NOTE
•
In this manual, pressing and holding down [Shift] (or [Alt]) and pressing the desired key will perform the following operations.
Example: [Shift] + [Canc] key
21
[ ] [ ] [ ] [ ] (Arrow keys)
Move the cursor or selected item up, down, left or right. If you press
this key while holding down [Shift] in the character input display, you
can move to the next or previous page.
22
[Print] key
Displays the printing preference display and allows you to print the
currently displayed data. (P.22)
23
[Set Cut]] key
Sets the cut method for printing.
24
[Adjust] key
Adjust the print position (P.32) and cut length, and adjust the cutter.
25
Space key
Enter a space.
26
[Symbol 1] key, [Symbol 2] key
Enter a symbol. Use the [Alt]+[Enter] keys to confirm the selected
unconfirmed symbol.
27
[Remove] key
This key is used to remove the tube or label tape from the printer.
(P.35)
28
[Caps Lock] key
If you press this key and then enter alphanumeric characters, they
will be capitalized.
9
9
Advertisement
Table of Contents
