Table of Contents
Advertisement
A MESSAGE IS COMING UP
If the print media gets jammed inside the printer, a "Feed error" message will be displayed on the display and printing will be canceled.
Follow the procedure below to remove the print media.
MESSAGE
Input value is out of the acceptable range.
In Vert/Hor char, Character Space setting is
not possible.
No data to paste.
Exceeding Memory Capacity
No more characters can be entered.
Length exceeded.
Input data exceeds cut length.
Numbering is already set for this page.
The number of character is over.
xxxxxxxx already exists.
Change the folder name.
Exceeding Memory Capacity
Excessive data are not saved.
No files.
No files in selected folder.
99 files already exists in selected folder.
The number of character is over.
Cannot input.
Change length or character size.
Enter a value within the setting range.
When the orientation is „Vert/Hor char, " the character space cannot be selected.
Cut or copy the page and prepare the data to be pasted.
There is insufficient memory to input text. (P.114)
Save the text data you have created, delete all text displayed on the screen, and then
enter new text.
Enter a value within the setting range
The numbering can be set only once per page.
Rework the file so that it fits within the number of character that can be entered.
Use a different folder name.
There is insufficient memory to save the file. Increase the free space by deleting
unnecessary files.
There are no files saved in the printer.
None of the files are saved in the selected folder. Select the folder again.
1 A maximum of 99 files can be saved in one folder. Delete unnecessary files before
saving, or save them in a different folder.
The character count limit for the specified cut length has been exceeded. Change the cut
length setting (P.62) or delete the characters.
Cannot input text with the specified character size and cut length. Change the cut length
(P.62) or character size (P.32).
DETAILS / SOLUTION
107
107
Advertisement
Table of Contents
