Table of Contents
Advertisement
Changing the Print Density
Depending on the print media you are using and the environment,
the printing may be too light or too dark. In such cases, adjust the
print density. The density can be set for each type and size of
print media.. The default setting is "3. "
[Example] Adjust the print density of the tube so that it is the
darkest.
1
Press
the [Adjust] key.
2
Use [
] or [
], to select "Print density, " and
press the [Enter] key.
Adjustments
Ful l Cut D ep th
Ful l Cut S p eed
Pr in t densi ty
3
Use [
] or [
] to select "PO, "
and press the [Enter] key
Print density
PO
POZ
PHM CLEAR
4
Use [
] or [
] to select "PO-05, "
and press the [Enter] key.
P O s i ze :
PO-04
Normal
PO-05
Normal
PO-06
Normal
5
Select "5" with [ ] or [ ] and
press the [Enter] key.
Print density
4 5
1 2 3
•
A " " mark will be displayed under the current setting.
•
Density can be set in the range of 1 (lightest) to 5 (darkest).
6
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
2
5
3
Changing the Print Speed
If printing is blurred or uneven, adjust the print speed. The default
setting is "High. "
[Example] Setting the speed to "Low" because the text is
blurred.
1
Press
the [Setting] key.
2
Use [
] or [
] to select "Setting, "
and press the [Enter] key.
Setting s
Print adjust
Setting
Others
3
Use [
] or [
] to select "Print Speed, "
and then press the [Enter] key.
Se tti n g
Print speed
Display density
Backlight (ADPTR)
4
Use [
] or [
] to select "Low, "
and then press the [Enter] key.
P ri n t s p ee d
Low
Mid
High
•
The speed can be adjusted to three levels: "Low, " "Mid, " and
"High. "
5
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
•
The print speed setting can be checked on the display.
61
61
Advertisement
Table of Contents
