Align Multiple Lines Of Text To The Center - Partex PROMARK T-2000 User Manual

Align Multiple Lines of Text to the Center

When "Centered" is selected for "Alignment, " multiple lines of text
are centered and placed in the center of the page. The default
setting is "Off. "
SETTING DETAILS
Off
Align multi-line text at the
(Default beginning and center them
on the page.
Setting)
Multi-line text is centered
On and placed in the center of
the page.
[Example] Create the following labels.
A-123
R11
1
Set the number
of lines to "2 Lines. " (P.36)
2
Enter
the text.
3
Press
the [Seg Len] key.
4
Use [ ] or [ ] to select "Cut Length, "
and then press the [Enter] key.
Cut Length
Cut Length
Alignment
PP+ Print Area
5
•
PRINT IMAGE
•
A-123
R11
A-123
R11
6
7
8
•
•
Use [ ] or [ ] to select "Specify, " enter "19.0"
(Cut Length), and then press the [Enter] key.
The value can be set by entering numbers or using arrow
keys ([ ] / [ ]).
Press the [Enter] key to return to the character input
display.
Cut Length
Automatic
Specify
19.0㎜
[ 15.7 to 150.0㎜ ]
Press
the [Seg Len] key.
Use [ ] or [ ]
to select "All Line Centering. "
Cut Length
Alignment
PP+ Print Area
All Line Centering
Use [ ] or [ ] to select "On, "
and then press the [Enter] key.
All line centering
Off
On
NOTE
The All Line Centering can be set for each page.
You may not select All Line Centering in the following
cases.
- When the cut length is set to "Auto. "
- When the alignment is set to anything other than
"Centered. "
- When the number of lines is set to "1 Line. "
- The orientation is "Vert/Hor char. "
45 45