Table of Contents
Advertisement
Turning Off Sounds
Turns off the key operation sounds and warning sounds. The
default setting for the sound is "On. "
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Setting, "
and press the [Enter] key.
S e t ti n g s
P ri n t a d j u s t
S e t ti n g
O t h er s
3
Use [
] or [
] to select "Sound, "
and then press the [Enter] key.
S ett in g
Backlight(ADPTR)
Backlight(BAT)
Sound
4
Use [
] or [
] to select "O"
and press the [Enter] key.
Sound
O
On
5
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
Speeding Up the Time until Printing Starts
You can speed up the time to start printing by setting not to adjust
the print position before starting printing. The default setting of the
print priority is "Print position. "
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Others"
and press the [Enter] key.
S ettings
Print adjust
Se tting
Oth ers
3
Use [
] or [
] to select "Print priority, "
and then press the [Enter] key.
O t he rs
AutoBacklightO
Print priority
FirstDeleteCheck
4
Use [
] or [
] to select "First Print, "
and press the [Enter] key.
Print priority
Print position
First Print
5
Press
[Shift] + [Canc] key.
•
The display returns to the character input display.
IMPORTANT
•
When "First Print" is selected, the margin at the top portion
of the tube is larger than when "Print position" is selected.
However, if the tube size is " Φ1.5 mm, " the amount of blank
space at the top portion will not change even if the print
priority setting is changed.
95
95
Advertisement
Table of Contents
