Table of Contents
Advertisement
CLEANING THE PRINTER
Cleaning the Outside of the Printer
Wipe the surface of the printer periodically to keep it clean.
WARNING
•
Before cleaning, be sure to turn off the power and unplug the
power supply. Also, remove the batteries from the printer.
Doing so may result in fire or electric shock.
•
Do not use alcohol, thinner, or other flammable solvents to
clean the unit. Doing so may result in fire or electric shock.
1
Turn o the power and unplug
the power plug from the power outlet.
•
If batteries are being used, remove them.
2
Wipe the surface
of the printer.
•
Wipe the printer with a cloth moistened with water and
wrung out tightly. Use a lint-free cloth.
•
Allow the water to dry completely before proceeding to the
next step.
3
Insert the power plug into
the outlet and turn on the power.
Cleaning the Inside of the Printer
If the inside of the printer is dirty, the print media may become
dirty or dust may enter the unit, causing printing defects. Wipe it
regularly to keep it clean.
WARNING
•
Before cleaning, be sure to turn off the power and unplug the
power supply. Also, remove the batteries from the printer.
Doing so may result in fire or electric shock.
•
Do not use alcohol, thinner, or other flammable solvents to
clean the unit. Doing so may result in fire or electric shock.
86
CAUTION
•
Remove the cutter before cleaning the area around the cutter
and media delivery port.
1
Turn o the power and unplug
the power plug from the power outlet.
•
If batteries are being used, remove them.
2
Wipe the surface
of the printer.
•
Open the cover and remove the ribbon cassette, attachment
(or label tape cassette), and cutter.
3
Wipe the inside
of the printer.
•
Wipe the printer with a cloth moistened with water and
wrung out tightly. Use a lint-free cloth.
•
Allow the water to dry completely before proceeding to the
next step.
IMPORTANT
•
Do not touch the ink ribbon connector, print head, or
connector for tube warmer inside the printer. Doing so may
result in malfunction of the product.
4
When you have finished cleaning, return the
cutter to its original position and close the cover.
Connector for
tube warmer
Print head
Connector for
ribbon cassette
Advertisement
Table of Contents
