Cleaning The Print Head - Partex PROMARK T-2000 User Manual

Cleaning the Outside of the Printer
7
Close
the cover.
•
The transport roller will spin.
8
Repeat
steps 5 to 7.
•
Open and close the cover 8 times to make one rotation of
the roller
9
When cleaning is finished,
press the [Shift] + [Canc] keys
•
The display returns to the character input display.
88

Cleaning the Print Head

If printing is not clear or white streaks appear, the print head may
be dirty. We recommend cleaning the print head about once a
month.
WARNING
•
Before cleaning, be sure to turn off the power and unplug the
power supply. Also, remove the batteries from the printer.
Doing so may result in fire or electric shock.
•
Do not use alcohol, thinner, or other flammable solvents to
clean the unit. Doing so may result in fire or electric shock.
1
Turn o the power and unplug
the power plug from the power outlet.
•
If batteries are being used, remove them
2
Open the cover and remove the ribbon cassette,
and attachment (or label tape cassette).
3
Open the cover and wipe off any dirt on the print
head with a cotton swab moistened with water
and wrung out tightly.
IMPORTANT
•
Do not touch the print head directly. Doing so may result in
malfunction of the product.
4
When cleaning is nished,
close the cover.