Table of Contents
Advertisement
Expanding the Print Area of the Plate
[Example] Create a plate as shown below.
1
Press
the [Seg Len] key.
2
Use [
] or [
] to select "Cut Length, "
and then press the [Enter] key..
Cut Length
Cut Length
Alignment
PP+ Print Area
3
Use [
] or [
] to select "Specify, " enter "4.0"
(Cut Length), and then press the [Enter] key.
•
The value can be set by entering numbers or using arrow
keys ([ ] / [ ]).
•
The display returns to the character input display.
Cut Length
Automatic
Specify
[
4.0 to 150.0㎜ ]
4
Press
the [Seg Len] key.
5
Use [
] or [
] to select "Alignment"
and press the [Enter] key.
Cut Length
Cut Length
Alignment
PP+ Print Area
A-12
4mm
4.0㎜
6
Use [
] or [
] to select "Centered, "
and press the [Enter] key.
•
Press the [Enter] key to return to the character input
display.
•
An "×" will appear next to the alignments that cannot be
selected.
Alignment
Centered
Left
Right
7
Press
the [Seg Len] key.
8
Use [
] or [
] to select the "PP+ Print Area"
and press the [Enter] key.
Cut Length
Cut Length
Alignment
PP+ Print Area
9
Use [
] or [
] to select "Centered, "
and press the [Enter] key.
•
When you press the [Enter] key, a message will appear.
Press any key to return to the character input display.
•
When "Expansion" is selected, the print media is
automatically changed to "Plate. " You cannot select any
other print media except plate.
Plate Print Area
Normal
Expansion
When selecting
expansion of PP+
Print Area, only
PP+ can be printed.
43
43
Advertisement
Table of Contents
