Table of Contents
Advertisement
Connecting the AC Adapter
5
Put the battery
cover back on.
•
Push the battery cover in until it clicks into place, and close
it completely so that there is no gap between the battery
cover and the printer.
IMPORTANT
•
If the product has batteries installed and the AC adapter is
also plugged into a power outlet, the AC adapter will be giv-
en priority as the power supply. However, it is recommend-
ed that you remove the batteries when using the AC adapter,
as they will be drained otherwise.
•
If the batteries are installed and the AC adapter is connect-
ed to the product, do not disconnect the AC adapter during
printing. The product will not be able to print properly if you
do so.
•
When printing using battery power, even if the AC adapter
is connected during printing, the power supply will not be
switched until printing is finished.
•
The remaining battery power cannot be displayed correctly
directly after switching the power supply from the AC adapt-
er to the batteries. Once printing starts, the remaining capac-
ity will be updated.
•
When using the (optional) tube warmer or when printing
large characters (character size: 6mm full-width), the bat-
teries will be drained quickly. In such cases, we recommend
the use of the AC adapter.
15
15
Advertisement
Table of Contents
