Table of Contents
Advertisement
SETTING THE CUT LENGTH
About Cut Length
The length of one tube (or one label) is called the "Cut Length. "
The default setting is "Auto. "
SETTING
Automatically sets and prints the optimal cut length based on the
Automatic
number of characters entered, the size of the characters, and the
(Default
spacing between the characters. The alignment is centered, and
Setting)
the margins are 2 mm on the left and 2 mm on the right.
Prints with the specified cut length. When „Specify" is
Specify
selected for „Cut Length, " you can specify the alignment (and
margin), plate print area, and all line centering.
Specify the Cut Length and Alignment
This is how the cut length and alignment are set. If you set the
cut length to "Specify, " you can change the alignment. The default
setting for alignment is set to "Centered. "
SETTING
Centered
(Default
Centers the text.
Setting)
Aligns text to the left end (in the direction of the start of
Left
the text). Margins can be set in the range of 2 to 5 mm.
Aligns text to the right end (toward the end of the text).
Right
Margins can be set in the range of 2 to 5 mm.
Even
Places text at equal intervals. Margins are 2 mm on
the left and 2 mm on the right.
Distribution
40
DETAILS
DETAILS
A1
Pump Room
Cut length
A1
e.g.) "Left" alignment
A1
e.g.) Plate Print Area: "Expansion, "
All Line Centering: "On"
NOTE
•
When "Centered" and "Even Distribution" are selected and
the maximum number of characters for the cut length is
used, the minimum margin is 0.7 mm in total for both sides.
PRINT IMAGE
Margin
Pump Room
Cut Length
Margin (2 - 5 mm)
Pump Room
Cut Length
Margin (2 - 5 mm)
Pump Room
Cut Length
Margin (2mm)
P u m p R o o m
Cut Length
PRINT IMAGE
Pump Room
Pump Room
A-123
R11
Margin
Margin (2mm)
Advertisement
Table of Contents
