Adjusting the Cutter Depth
Changing the Cut Depth for Full Cut
The cut depth for the full cut can be set for each type and size of
print media. The default setting is set to "Normal. "
[Example] The full cut of the tube is not cut properly, so make
the cut one step deeper
1
Press
the [Adjust] key.
2
Use [
] or [
press the [Enter] key.
Adjustments
Half Cu t D ep t h
Half Cu t Sp eed
F u l l Cu t Dep th
3
Use [
] or [
[Enter] key.
Full Cut Depth
PO
POM
PHM CLEAR
4
Use [
] or [
and press the [Enter] key.
P O s i z e :
PO-04
PO-05
PO-06
5
Use [
] to select "Deep 1" and
press the [Enter] key.
Full Cut Depth
[
Deep 1
•
Full Cut Depth can be set in four levels: "Deep (1~3), " "Normal. "
•
Each time you press [
6
Press
the [Shift]+[Canc] keys.
IMPORTANT
•
If you make the cut depth deeper than necessary, the cutter
and blade receiver will wear out quickly.
66
] to select "Full Cut Depth, " and
] to select "PO, " and press the
Normal
Normal
Normal
] to select "PO-05, "
Normal
Normal
Normal
]
], the cut is deepened by one step.
Using Forced Full Cut
If the situation is not improved after adjusting the cut depth for full
cut, use "Forced full cut. " With Forced full cut, the cut is made to
the deepest point. If the situation is not improved even after using
Forced full cut, replace the cutter. (P.90)
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Others"
and press the [Enter] key.
S et t i n g s
P ri n t ad j us t
S et t i n g
O t h er s
3
Use [
] or [
] to select "Forced full cut, "
and then press the [Enter] key.
•
A confirmation screen will appear
Others
R em o v e
Cl e an i ng
Fo r c ed f u l l cu t
4
Select "Yes" with [ ] or [ ]
and press the [Enter] key.
•
Full cut will be performed.
Cut print media?
Yes
5
Press
the [Shift]+[Canc] keys.
•
The display returns to the character input display.
No