Table of Contents
Advertisement
Specifying the Number of Lines
Sets the number of lines. The default setting is "1 Line. "
SETTING
1 Line
Input in one line
(Default Setting)
2 Lines
Input in two lines
3 Lines
Input in three lines
[Example] 2 line input.
1
Display the page where you want
to change the number of lines.
2
Press
the [Set Lines] key.
3
Press [
] or [
to select "2 Lines. "
•
An "×" will appear next to the number of lines that cannot be
selected.
Lines
1 Line
2 Line
3 Line
4
Press
the [Enter] key.
•
The number of lines setting can be checked on the display.
•
Use the arrow keys ([
between the lines.
■
36
DETAILS
PRINT IMAGE
12V
12V
24V
+12V
-12V
200V
]
], [
], [ ], [ ]) to move
２
NOTE
•
The number of lines can be set for each page.
•
When the character size is set to "1.3 mm full-width, " "2 mm
full-width, " or "2 mm Half, " the text can be printed in three
lines. If you want to print in three lines, set the character
size before selecting the number of lines. (P.32)
•
If after entering text, you would like to reduce the number
of lines, delete the second (or third) line of text and then
change the line number setting.
•
You may not be able to select "2 Lines" or "3 Lines"
depending on the selected character size.
•
No error message will be displayed even if the print data
extends beyond the width (top and bottom) of the print
media. It is recommended that you refer to the preview to
make sure that no characters are missing before printing.
(P.56)
Advertisement
Table of Contents
