Adding a Line Between Lines
This function allows you to print a solid
line (center line) between the first and
second lines of data entered in two
lines. The default setting is "Off. "
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Print Settings"
and press the [Enter] key.
Settings
Pa g e S e t t i n g s
Pr i n t S e t t i n g s
D e l e t e A l l
3
Use [
] or [
] to select "Center Line, "
and then press the [Enter] key.
Print Settings
PP+ Full cut
Underline 6 , 9
Center Line
4
Use [
] or [
] to select "On, "
and then press the [Enter] key.
•
When printing, a solid line will be printed between the first
and second lines.
Center Line
Off
On
5
Press
the [Shift]+[Canc] keys.
•
The display returns to the character input display.
NOTE
•
The settings for this function are applied to all pages. You
cannot change the settings for each page.
•
The center line will not be printed in the following cases.
- When the number of lines is "1 Line" or "3 Lines. "
- When the orientation is "Vert/Hor char. "
+12V
+24V
39
39