Table of Contents
Advertisement
MESSAGE
3 line data setting exists.
Numbering data setting
exists.
No character data.
Data beyond cut length
will be deleted. OK?
When orientation is Vert/Hor char, the center
line is not printed.
Close cover and press
any key.
The number of character is over.
Print media isn't set.
Ribbon cassette isn't set.
End of media.
Pull out print media
Replace print media.
End of ribbon.
Replace ribbon cassette.
Print head position can't be initialized.
Print head can't be moved to print position.
Cut position can't be initialized.
108
The page you are trying to divide or combine contains three-line data. Change or delete
the threeline page.
The page you are trying to divide or combine has numbering. Delete the numbering.
(P.37)
You need to have already entered text in advance to display the printing preference
display. Enter characters before pressing the [Print] key.
When „Yes" is selected, data exceeding the cut length will be deleted automatically.
If you select „No, " the deletion will be canceled. Change the cut length or the number of
characters.
The center line will not be printed on pages where the orientation is „Vert/Hor char. " If
you want to print the center line, change the orientation. (P.34)
The numbering can be set only once per page.
You cannot print with the cover open. Close the
cover and press any key.
Reload the print media correctly. Press the [Enter] key to start printing. (P.20)
Depending on the type of tube, the tube may not be detected. In this case, set the print
media to „Clear Tube" in the print settings and print. (P.54)
Load the ribbon cassette. Press the [Enter] key to resume printing. (P.18)
The print media ran out during printing. Pull out the print media from the printer and
press any key. Replace the print media with a new one and press the [Enter] key to
resume printing from the interrupted page. (P.20)
Load a new print media and press the [Enter] key to resume printing. (P.20)
Replace the ribbon cassette with a new one and press the [Enter] key to resume printing
from the interrupted page.
Press any key. If the same message appears again,
DETAILS / SOLUTION
Advertisement
Table of Contents
