Surround Text with a Frame
This allows you to surround text with a frame. The following
frame shapes are available, with the default value set to "None. "
Pump Room
Pump Room
Pump Room
[Example] Enclosing text in a
1
Display the page where you want
to change the frame settings.
2
Press
the [Frame] key.
3
Use the arrow keys [
to select
from the list of frames.
Frame
None
4
Press
the [Enter] key.
•
The display returns to the character input display.
•
The frame shapes setting can be checked on the display.
■
Pump Room
Pump Room
frame.
], [
], [ ], [ ]
NOTE
•
The frame can be set for each page.
•
When the cut length is specified, the frame may not be set.
•
Depending on the settings of the number of lines, character
size, cut length, etc. and the size of the print media, the
frame may not be printed correctly.
•
No error message will be displayed even if the print data
extends beyond the width (top and bottom) of the print
media. Refer to "Height limit table for each media and font
size" (P.116) for information on character size and frame
settings.
33
33