Table of Contents
Advertisement
Replacing the Print Media
To replace the print media installed in the printer with a different
one, follow the procedure below.
NOTE
•
For information on the print media that can be used with this
product, refer to "Consumable Supplies and Options (P.122)" .
For Thin Tubes (Φ1.5 mm)
1
Open
the cover.
2
As shown in the figure, pull the tube out while
pressing the jam recovery lever in the direction of
the arrow.
2
1
3
Load the print
media. (P.20)
For Other Print Media
1
Turn on
the power. (P.16)
2
Press
the [Remove] key.
•
The following screen will be displayed.
Unload print media?
Yes
3
Select "Yes" with [ ], [ ]
and press the [Enter] key.
•
The print media will be rotated backwards
Unloading...
4
Open
the cover.
No
23
23
Advertisement
Table of Contents
