Table of Contents
Advertisement
MESSAGE
Battery is low.
Continue operation?
Wrong cut length
Adjust the length?
Bluetooth is disconnected. Reconnect to
Bluetooth device.
Exceeding Memory Capacity
Reduce the data size and resend.
Loading data exceeds the cut length.
The excessive data have been deleted.
110
The battery level is low. If you select „Yes, " you can continue printing. When you have
finished printing, turn off the power once. After that, replace the batteries or connect the
AC adapter.
When „Yes" is selected, the cut length is automatically changed according to the print
media. If you select „No, " the cut length will not be changed. Change the cut length or the
number of characters.
Check the Bluetooth status of the printer and the communication device, and connect
them again.
There is insufficient memory to receive text. (P.114)
Reduce the number of characters and send the data again.
When a file with text exceeding the cut length is inserted into data with a specified cut
length, if you load it as „text only, " the characters past the cut length will be deleted, then
the text will be displayed.
DETAILS / SOLUTION
Advertisement
Table of Contents
