Setting the Cut Length Settings for All Pages.
You can set the Cut Length settings (Cut Length, Plate Print Area,
Alignment, and All Line Centering) for all pages at once.
1
Press
the [Seg Len] key.
2
Use [
] or [
and press the [Enter] key.
•
The cut length setting screen will appear.
Cut Length
PP+ Print Area
All Line Centering
Batch Setting
3
Use [
] or [
length, and then press the [Enter] key.
•
The value can be set by entering numbers or using arrow
keys ([ ] / [ ]).
•
When you press the [Enter] key, the PP+ Print Area setting
screen appears.
Cut Length
Automatic
Specify
[
4.0
4
Use [
] or [
and press [Enter] key.
•
Select "Normal" if you want to print on an area other than
the plate.
•
When the PP+ Print Area is set to "Expansion, " the print
media is automatically changed to "Plate. " You cannot select
any other print media except PP+.
•
Press the [Enter] key, and the alignment setting screen will
appear.
PP+ Print Area
Normal
Expansion
46
] to select "Batch Setting, "
] to select "Specify, " enter the cut
8.0㎜
to 150.0㎜ ]
] to select the setting
5
Use [
] or [
] to select the desired setting,
and then press the [Enter] key.
•
When you select "Left" or "Right, " set the margins. (P.41)
•
When you press the [Enter] key, the All Line Centering
setting screen appears.
Alignment
Centered
Left : 2㎜ [2 to 5]
Right : 2㎜ [2 to 5]
6
Use [
] or [
] to select the settings,
and then press the [Enter] key.
•
Press the [Enter] key to return to the character input display
after the data has been checked and changed.
All Line Centering
Off
On
NOTE
•
If there is data that exceeds the cut length due to changes
in the batch settings, a confirmation message will appear
to delete the data that exceeds the cut length. To cancel the
operation, select "No. "
•
If you are unable to input text due to batch setting, set the
cut length of the page to "Auto" or change the character
size.