Installing The Ribbon Cassette - Partex PROMARK T-2000 User Manual

INSTALLING THE RIBBON CASSETTE

IMPORTANT
•
When printing on a plates, use a black, 40m ribbon
cassette. Other ribbon cassettes (black, 150m; white, 85m)
will not print correctly.
•
Please purchase commercially available tubes and plates
for use. For more information on the sizes that can be used,
refer to "Consumable Supplies and Options (P.122)" .
•
Dispose the used ribbon cassette according to the rules of
recycling, they should be left at the designated collection
point.
1
Open
the cover.
2
Remove
the used ribbon cassette.
18
3
Remove the new ribbon
cassette packing material.
IMPORTANT
•
Do not touch the IC chip on the
ribbon cassette. Doing so may
render the ribbon cassette
information unreadable.
4
Remove any
slack in the ribbon.
IMPORTANT
•
If the ribbon is loose, it may not operate properly.