Table of Contents
Advertisement
Loading a Label Tape Cassette or Wrap-around Tape Cassette
IMPORTANT
•
Dispose the used label tape cassette and wrap-around tape
cassette according to the rules of recycling, they should be
left at the designated collection point.
NOTE
•
The procedure for removing set p rint media from the printer,
please refer to "Replacing the Print Media (P.23)" .
1
Check the condition
of the cassette.
If the release paper has a high spot, or the tips are not
aligned, cut that portion off.
Pull out the end of the tape by about 5 mm to 7 mm as
shown in the figure.
NOTE
•
If label tape or other material has gotten into the cassette,
use tweezers to pull out the tape tip, as shown in the figure.
2
Open
the cover.
22
3
Install the cassette
into the printer.
Align the cassette with the slot on the printer, and push it in
firmly until it clicks into place.
1
2
4
Close
the cover.
Advertisement
Table of Contents
