How to Read the Display
Prev
1
Caps Lock
Indicates whether the Caps Lock mode is active.
: Active, so all alphabetic characters
are entered in uppercase.
(No indication) : Normal (inactive).
2
Insert/Overwrite mode
Indicates which of the two input modes is selected:
: Insert mode
(No indication) : Overwrite mode
3
Printing speed
Displays the printing speed settings.
H: High
M: Middle
L: Low
10
1
2
3
4
Remaining
INS
Print Speed
ribbon
Caps
Half Cut
1000
H / H
Page
Next
A/
16
15
5
6
7
Seg Length/
PWR
Warmer
8 . 0 C
3mm
1
Frame Char Size
#Line
14
13
12
4
Half cutting mode
The settings for adding a half cut to tubes or label tapes are indicated
by the following symbols.
(No indication) : Not half cut, and no cutting line is printed.
5
Remaining ribbon
Indicates the remaining capacity of the ink ribbon with a mark.
(Ribbon remaining) : The display changes every 10%. When
. . .
(Out of ribbon)
(Not displayed)
8
Align
9
N
1
Cont Print
Char Space
10
11
: Half cut.
: Not half cut, but a solid line is printed showing
where to cut with scissors, etc.
: Not half cut, but a dotted line is printed showing
where to cut with scissors, etc.
the remaining capacity is low, prepare a
new ribbon cassette.
: The ribbon cassette is not loaded, or
the information cannot be read.