Table of Contents
Advertisement
Cleaning the Transport Roller
If printing is not clear or the print media cannot be fed properly,
the transport roller may be dirty. We recommend cleaning the
rollers about once a month.
WARNING
•
Do not use alcohol, thinner, or other flammable solvents to
clean the unit. Doing so may result in fire or electric shock.
1
Open the cover and remove the ribbon cassette,
and attachment (or label tape cassette).
2
Close the cover,
and then press the [Settings] key.
3
Use [
] or [
] to select "Others"
and press the [Enter] key.
S et t in gs
P r in t a dju s t
S et t ing
O t h er s
4
Use [
] or [
] to select "Cleaning, "
and press the [Enter] key.
Othe rs
Remo ve
Cle aning
Fo rc e f ull cu t
Cl ean ing mod e
Open s afet y cover
a nd remove dust .
•
After pressing a key, instructions will be displayed
on the screen.
5
Open
the cover.
•
When the cover is opened, instructions will be displayed on
the screen.
C l e an i n g m o de
A f te r cl e a n in g,
c l ose saf e ty c o ve r.
6
Wipe off any dirt on the transport roller 1, 2 and 3
with a cloth moistened with water and wrung out
tightly.
•
Transport roller 3 is cleaned by pushing the jam recovery
lever in the direction of the arrow.
•
Use a lint-free cloth.
Jam recovery lever
87
87
Advertisement
Table of Contents
