Table of Contents
Advertisement
Expanding the Print Area of the Plate
10
Set the character size
to "2 mm half-width. " (P.32)
11
Use [
] or [
and press the [Enter] key.
•
The Plate Print Area setting can be checked on the display.
A-12
NOTE
•
The PP+ Print Area can be set for each page.
•
You can change the setting of the Plate Print Area when the
cut length is "Specified. " When the cut length is "Auto, " the
PP+ Print Area cannot be changed.
44
] to select "Centered, "
4 . 0 C E
Advertisement
Table of Contents
