Table of Contents
Advertisement
Numbering
8
Press
the [Enter] key.
•
The display returns to the character input display. The
sequentially numbered control character ( N ) will be
entered after "Pump Room. "
•
When printing is executed, "Pump Room 1" to "Pump Room
10" will be printed.
NOTE
•
Numbering can be set only once per page.
•
If you want to cancel the numbering setting, use the [Back
Space] key to delete the control character ( N ) of the
numbering.
•
If you want to set numbering in descending order, such as
"10 to 1, " enter "10" for the "Start value" and "1" for the "End
value. "
•
The settings for padding characters are as follows.
SETTING
None
Zero
Space
SETTING
None
Pump Room 8
Zero
Pump Room 08
Space
Pump Room 8
•
If all the sequential numbers have the same number
of digits, or if an alphabetic character is selected for
the sequential number, the settings screen for padding
characters will not be displayed.
38
SET RANGE
No padding characters.
A leading „0" will be entered as
a padding character.
A leading space will be entered
as a padding character.
PRINT IMAGE
Pump Room 9
Pump Room 10
Pump Room 09
Pump Room 10
Pump Room 9
Pump Room 10
Underline 6, 9
The numbers 6 and 9 can be underlined to distinguish them from
each other. The default setting is "Off. "
16
1
Press
the [Settings] key.
2
Use [
] or [
] to select "Print Settings"
and press the [Enter] key.
Settings
Pa g e S e t t i n g s
Pr i n t S e t t i n g s
D e l e t e A l l
3
Use [
] or [
] to select "Underline 6, 9"
and press the [Enter] key.
Print Settings
Half cut PP+
Underline 6 , 9
Center Line
4
Use [
] or [
] to select "On, "
and then press the [Enter] key.
•
When printing, the numbers 6 and 9 will be underlined.
Underline 6 and 9
On
5
Press
the [Shift]+[Canc] keys.
•
The display returns to the character input display.
NOTE
•
The settings for this function are applied to all pages. You
cannot change the settings for each page.
29
9 6
Advertisement
Table of Contents
