Changing The Display Contrast - Partex PROMARK T-800 User Manual

Changing the display contrast

The display can be difficult to see, depending on the ambient brightness and the viewing angle. If the display is difficult to
see, adjust the display contrast. The display contrast can be set to any of nine levels.
ex. Because the display is faint, increase the display contrast two steps.
Intensity of the back light is not adjustable.
important
1
Press [Func].
The Settings display appears.
2
Press [ ] or [
and then press [Enter].
The Density adjustment display appears.
3
Press [ ] or [
then press [Enter].
The Display contrast display appears.
4
Press [ ] twice.
Lowering the display contrast
Press [ ] to lower the display contrast.
5
Press [Enter].
The display returns to the character input display.
120
] to select "Density adjustment",
] to select "Display contrast", and
P
Density adjustment
Print density
Display contrast
Display contrast
Light Dark
[
] indicates the current display
contrast.
Display contrast
Light Dark