PREPARING THE POWER SUPPLY
Connecting the AC Adapter
CAUTION
•
Be sure to use the supplied genuine AC adapter and power
cord.
1
Connect the power cord to the AC adapter, and
plug the AC adapter into the printer.
2
Insert the power plug into
a power outlet.
IMPORTANT
•
If the AC adapter jack is defective or damaged, it cannot be
repaired. Please purchase the AC adapter from your point of
purchase for this product.
Use with Batteries
If you are outdoors or in any other place where you do not
have access to a power supply, you can use the product with
batteries.
CAUTION
•
Be sure to use fully charged "eneloop AA Standard Model
Batteries (Part number: BK-3MCCE, BK-3MCCA). " Do not use
any other type of battery. Failure to do so may result in fire,
malfunction, or injury.
1
Prepare 6 "eneloop AA Standard Model Batteries"
(sold separately).
2
Make sure that the power
is turned off.
14
2
1
2
Make sure that the power
is turned off.
3
Remove
the battery cover.
4
Insert
the batteries.
•
Paying attention to the direction in which you insert the
batteries, as marked with the
and
symbols.