Expanding The Print Area Of The Plate - Partex PROMARK T-2000 User Manual

Expanding the Print Area of the Plate

When the PP+ Print Area is set to "Expansion, " the print area can
be expanded for printing. The default setting is set to "Normal. "
SETTING
Normal
(Default The margins specified in the alignment are set.
Setting)
When „Centered" is selected: The text is centered.
„Right" alignment: Aligns the text at the right end of
the text (toward the end of the text). The margin is 0
mm on the right.
Expansion
„Even Distribution" alignment: The text is spaced
evenly. The margin is 0 mm on the left and right.
„Even Distribution" alignment: The text is spaced
evenly. The margin is 0 mm on the left and right.
42
DETAILS PRINT IMAGE
(P.40)
(Cut length - a)/2
A-123
Cut length
A-123
Cut length
Cut length
A - 1 2 3
(Cut length - a)/2
a
A-123
Cut length