Printing Text With Sequential Numbers (Numbering Print) - Partex PROMARK T-800 User Manual

Printing text with sequential numbers (Numbering print)

Assume that you want to produce the following tubes.
Serial characters can be set in only one place on a page.
Fig. 1
Pump Room 1 Pump Room 2
The portion of the character data consisting of numbers from 1 to 10 is incremented (or decremented) by "1" each time
it is printed, and is called the "number portion". The remaining portion of the character data is called the "common
portion". (Fig. 2)
Fig. 2
Variable part
Fixed part
Pump Room 3
To print tubes that contain a number portion such as those shown in Fig. 1, it is not necessary to explicitly create ten
pages with character data ranging form "Pump Room 1" to "Pump Room 10" (as shown in Fig. 3). Instead, you need only
create one page of character data consiting of a common portion and a number portion as shown in Fig. 4, and then
print that page.
Fig. 3
Pump Room 1 Pump Room 2
(page 1) (page 2)
Fig. 4
ex. Produce the tubes shown in Fig. 1.
1
Input "Pump Room".
This is the common portion.
2
Press [Num].
The Numbering display appears.
Pump Room 3 Pump Room 4
Pump Room 3 Pump Room 4
(page 3) (page 4)
Pump Room
Variable part ( instead of a digit, set
calculation range )
Write the fixed part in a standard way
Pump Room 10
Pump Room 10
(page 10)
PART 4
Advanced Operations
Pump Room
105 105