3.2 WinSign: Type in text information
You can see 5 different columns at the middle of the page
•
Product type - Shows what type of product you choose before.
•
Length - Here you can set the length on your marker.
•
No. of each - How many you want of each marker.
•
Size - The size of the characters.
•
Text - Here you can type in your marker information.
Hint:
You can also past in information from Excel, create number sequences etc. You read
more about this in the user manual for WinSign.
Cut compensation.
Sometimes you can see an unprinted vertical line in the text on the marker. This is
common on almost all thermo transfer printers.
The reason why the unprinted line appears is that the needles in the thermo transfer
head cools off when the machine is cutting. When the machine starts feeding the pro-
file again, the needles doesn't have the right temperature to transfer the ribbon onto
the profile.
To avoid this vertical line you can check the box for cut compensation. WinSign will
then calculate so it knows the position of the printing head when the marker is cut. The
software will adjust the spacing between the characters so that the unprinted vertical
line is positioned between two characters.
2009-11-27
QUICK START MK10
PARTEX MARKING SYSTEMS
7