Device Control Block - Sony MLS-X1 User Manual

Device Control Block

The device control block is used for three-dimensional
transforms using a DME, two-dimensional transforms
using a resizer, executing effect timelines, controlling
a
b
a Mode selection buttons / channel selection buttons
(assignable buttons)
You can assign mode and channel selection buttons in the
Home > Setup > Panel > Module > Button Assign menu
(19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 402).
Mode selection buttons
Function Button name
name
Menu MENU
Description
• Switches to menu
parameter operation
mode.
• You can adjust
parameters (numbers 1
to 3) of the currently
displayed menu using
the trackball and Z-ring.
• Press the [MENU]
button twice, turning it
on green, to fix the
target of the trackball
and Z-ring to the
parameter currently
being adjusted.
35
devices/frame memory/clip players, entering menu
parameters, and other functions.
Function Button name
name
Run Control RUN CTRL
M/E-1 to M/E1 to M/E5
M/E-5 P/P
P/P
DME DME
Device DEV
e
d
c
Description
• Switches to run control
operation mode.
• Enables operation of
the currently recalled
effect timeline using the
Z-ring.
• Switches to resizer
operation mode.
• The first selected button
becomes the reference,
and is lit green.
Subsequent selected
buttons are lit amber.
• Switches to three-
dimensional transform
operation mode.
• Switches to device/
frame memory/clip
player operation mode.