Sony MLS-X1 User Manual page 37

Function Button Description
name name
Center CTR • When the [CTR] button is
• When the [CTR] button is
• When the [BDR/CROP] button
Border/ BDR/ • When the [BDR/CROP] button
Crop CROP
• When the [BDR/CROP] button
Three-dimensional transform operation mode
This mode is used for three-dimensional transform
operations on images using a DME.
For details about DME operations, see "Three-
Dimensional Transforms" (page 199).
Function Button Description
name name
Local LOCAL Selects local space.
Global GLB Selects global space.
Source SRC Selects source space.
Target TRGT Selects target space.
Aspect/ ASP PERS • When the [ASP PERS] button
Perspective
• When the [ASP PERS] button
• When the [ASP PERS] button
pressed once:
Adjusts the two-dimensional
transform parameters to the
detent positions.
pressed twice, or the [CTR]
button is pressed once while
pressing the [SHIFT] button:
Returns the two-dimensional
transform parameters to the
default values.
is lit green, the [CTR] button
selects the edge (bottom edge)
to crop.
is pressed (lit amber):
Adjusts the border width of a
key using the trackball or
Z-ring.
is pressed while pressing the
[SHIFT] button (lit green):
Adjusts the crop width of a key
using the Z-ring.
is pressed in source space:
Adjusts the aspect ratio of an
image using the trackball or
Z-ring.
is pressed while pressing the
[SHIFT] button in source
space:
Adjusts the skew of an image
using the trackball.
is pressed in target space:
Adjusts the viewpoint position
(perspective of an image)
using the trackball or Z-ring.
Function Button
name name
Location LOC SIZE
Size
Location LOC XYZ
XYZ
Rotation ROT
Shift SHIFT
Clear Work CLR
Buffer WORK
BUFR
Axis AXIS LOC
Location
X X
Y Y
Z Z
Fine FINE
37
Description
• Moves an image using the
trackball.
• Scales an image (shrink/
magnify) using the Z-ring.
Moves an image using the
trackball or Z-ring.
Rotates an image using the
trackball or Z-ring.
Used in combination with the
[ASP PERS], [ROT], [CTR], and
[CLR WORK BUFR] buttons.
• When the [CLR WORK BUFR]
button is pressed once:
Returns the three-dimensional
transform parameters to the
initial settings.
• When the [CLR WORK BUFR]
button is pressed twice, or the
[CLR WORK BUFR] button is
pressed once while pressing
the [SHIFT] button:
Returns all DME parameters to
the initial settings.
Moves the rotation axis of an
image using the trackball or
Z-ring.
• Restricts the parameters
targeted by the operation.
When the [X] button is lit:
Operations on parameters on
the X-axis using the trackball
are enabled.
When the [Y] button is lit:
Operations on parameters on
the Y-axis using the trackball
are enabled.
When the [Z] button is lit:
Operations on parameters on
the Z-axis (Z-ring adjustment
items) using the Z-ring are
enabled.
• When the [X] button, [Y]
button, and [Z] button are lit
green, you can enter
parameter settings using the
numeric keypad control block.
Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and
Z-ring.