Editing A Macro Event - Sony MLS-X1 User Manual

The currently recalled register number is displayed in
the numeric keypad window. To select another
register, enter a register number.
Press [Enter] to confirm to save the created/edited
macro in the register.
To exit macro edit mode without saving
Press the [Edit Enable] button, check the message,
then press [OK].

Editing a Macro Event

Select the target register to edit in the Home > Register >
Macro > Edit Macro menu (18307.11) to switch to edit
mode and edit an event. When finished editing, save the
register.
For details, see "Creating and Editing a Macro"
(page 314).
You can edit an event using the following menu or the
taskbar.
Home > Register > Macro > Edit Macro menu
(18307.11)
Event list at the top:
Displays the events registered in the selected register.
Select an event insertion position and target event to
edit from the list.
You can check the following information.
• Number and name of register being edited
• Event number
• Event type
Displays "Event" or "Continue."
• Symbol
Displays the symbol name of an event.
• Data
Displays the parameter setting values.
• Parameters
Displays the selected event number and the
configured parameter names below the list.
Operation buttons at the bottom:
Perform edit operations using the [Add New Event]
button, [Edit Event] button, and buttons in the [Edit]
group.
Pressing the [All Edit Options] button in the [Edit]
group displays the [Edit Macro Event] window.
The buttons used for editing are shown on the left and
a numeric keypad area is shown on the right in the
[Edit Macro Event] window.
[Macro Edit] taskbar
You can display the following information and perform
the following operations using the [Macro Edit] taskbar.
• Number and name of register being edited
• Selected event number and total number of events
• Current event symbol and data
A "..." suffix is displayed when the whole data cannot
be displayed.
Press the event data display to display the whole event
data. To return to the previous display, press [OK].
• [Event – Insert After] button
Inserts the current event after the selected event.
• [Edit Macro] button
Recalls the Home > Register > Macro > Edit Macro
menu (18307.11).
Event structure
A macro event consists of an "Event" or "Continue" type,
symbol, and parameters.
Specify the event type using "Event" or "Continue." Use
"Continue" when you want to add another parameter to
the symbol and parameters set for "Event."
Select a type of event according to the symbol and specify
the required data using the parameters.
For details about symbols and parameters, see "Events
and Symbols" (page 517) and "Symbols and
Parameters" (page 518).
Notes
• Selecting an "Event" event as the target to edit also
selects the subordinate "Continue" events.
• "Continue" may not be supported depending on the
symbol.
Inserting an event
Create and register events.
1
In the event list, select the event at the insertion
position.
2
Press the [Add New Event] button.
The [Add New Event] window appears.
3
Select a type of event.
To insert "Event," set the [Event] radio button to the
on state.
To insert "Continue," set the [Continue] radio button
to the on state.
An [Event] button or [Continue] button is added at the
start of the [Symbol/Parameter] group.
Note
When inserting at the top of the list, [Continue]
cannot be selected.
4
Press the [Event] button or [Continue] button in the
[Symbol/Parameter] group.
The [Symbol] window appears.
315