Setting A Logical V/K Pair Color - Sony MLS-X1 User Manual

Note
When multiple logical V/K pair numbers are selected,
consecutively numbered logical V/K pair names are
set.
For details, see "Name settings when multiple items
are selected" (page 78).
Copying a logical V/K pair name table
You can copy settings between logical V/K pair name
tables.
1
Open the Home > Setup > Xpt Assign > V/K Pair >
Copy Logical V/K Pair Name menu (19102.23).
A list of copy source tables is shown on the left, and
a list of copy destination tables is shown on the right.
2
Select copy source and copy destination tables.
3
Press the [Copy] button.
4
Check the message, then press [OK].

Setting a Logical V/K Pair Color

You can set a V/K pair color linked to a logical V/K pair.
1
Open the Home > Setup > Xpt Assign > V/K Pair >
Logical V/K Pair Assign menu (19102.24).
2
Select the target logical V/K pair number to set.
To select and set multiple logical V/K pair numbers,
place a check mark beside the target logical V/K pair
numbers to set.
To select and set all logical V/K pair numbers, place
a check mark in the Select All checkbox.
3
Press the [V/K Pair Color] button and select a user
color (User Color 1 to User Color 8) from the pull-
down list.
Changing the user color
Note
The color of the buttons may be different to the color
adjusted using the menu.
After adjusting the color, check the actual color of the
button when it is lit.
1
Open the Home > Setup > Xpt Assign > V/K Pair >
Edit User Color menu (19102.25).
2
Select the target user color (User Color 1 to User
Color 8) to set in [Target].
3
Adjust the color in [Adjust Color].
Color adjustment sliders and the adjusted colors are
displayed in [Adjust Color].
Adjust the color using the [R] (red), [G] (green), and
[B] (blue) sliders while monitoring the color.
To select a preset color
Select a color in [Reset Color].
To return to the previous user color
Press the [Clear] button.
4
Press the [Apply] button.
382