Wipe Snapshots; Wipe Snapshot Operations (Flexi Pad Control Block) - Sony MLS-X1 User Manual

Wipe Snapshots

You can save a snapshot of a wipe pattern together with
all modifiers and pattern limit settings in a register for
recall when required. There are ten wipe snapshot
registers on each switcher bank.
For details about editing a wipe snapshot register, see
"Wipe Snapshot Register Operations" (page 291).
Saving and recalling a wipe snapshot can be performed
using the Flexi Pad control block or the menu.
Wipe Snapshot Operations (Flexi
Pad Control Block)
You can configure a wipe snapshot using the Flexi Pad
control block of the target switcher bank.
Memory recall section in wipe snapshot
operation mode
The illustration shows the ICP-X7000 Flexi Pad control
block. The operation for the ICP-X1000 series Flexi Pad
control block is the same.
WIPE button
Memory recall section
Pressing the [WIPE] button in the Flexi Pad control block
switches the memory recall section to wipe snapshot
operation mode.
UNDO button
DEL button
160
You can select wipe snapshot registers (1 to 10) using the
buttons in the memory recall section.
The wipe pattern icon is displayed on buttons for registers
with a registered snapshot.
The register number is displayed on buttons for registers
without a registered snapshot.
The wipe pattern number is displayed on the top right
button in the memory recall section.
The button color varies as follows, according to the
register state.
Gray characters: Register not containing a registered
snapshot
White icon/text: Register containing a registered snapshot
Lit orange: Last recalled register
Notes
• The register name is displayed instead of the wipe
pattern icon on buttons for registers with a registered
snapshot. The register number is displayed if a register
name has not been configured.
For details about setting the button display, see
"Setting the button display in wipe snapshot operation
mode/DME wipe snapshot operation mode"
(page 419).
• When both the main pattern and sub pattern are selected
for a pattern mix, the main pattern icon is displayed.
Selecting a wipe pattern
1
Press the [WIPE] button.
The memory recall section switches to wipe snapshot
operation mode.
2
Press the [PTN NO.] button.
The memory recall section switches to numeric
keypad mode.
3
Enter a pattern number and press the [ENTER]
button.
The memory recall section returns to wipe snapshot
operation mode. The selected pattern number is
displayed on the top right button in the memory recall
section.
Saving a wipe snapshot
Set a wipe and save a wipe snapshot register using the
following procedure.
1
Press the [WIPE] button.
The memory recall section switches to wipe snapshot
operation mode.