Deleting A File; Renaming A File - Sony MLS-X1 User Manual

For details, see "Editing Package Properties"
(page 332).
To select the default package
Press the [Default Package] button.
8
In the [Target Package] group list, select a copy
destination file.
When multiple files are selected, select the first copy
destination file.
You can also press the [Select Destination] button
and enter a file number in the numeric keypad
window.
The copy destination of the first file selected in the
[Source Package] group is the first file selected in the
[Target Package] group, and the subsequent files in
the [Target Package] group in the same relative
positions as the selected files in the [Source Package]
group become copy destinations. The first file in the
[Target Package] group is shown in light blue, and the
subsequent copy destination files are shown in blue
gray.
Notes
• Selection of a file is not required in the macro
attachment category.
Pressing the [Search] button searches for the file
name and displays only the corresponding files.
• Searching is not available for key snapshots, wipe
snapshots, DME wipe snapshots, and macro
attachment categories.
9
Press the [Copy] button.
10
Check the message, then press [OK].
The files are copied.
To display the file view/edit menu
A list of the files included in the selected package is
displayed in the [Source Package] group/[Target
Package] group.
Press the [Browse Files] button to recall the file view/edit
menu for each category.
For the effect timeline category, the Home > File >
Register > Effect Timeline > Browse Files menu
(10104.14) is recalled.

Deleting a File

Note
Files in a locked package cannot be deleted.
1
Open the Home > File > Register > Effect Timeline >
Browse Files menu (10104.14).
2
Select a region.
The regions that can be selected vary depending on
the category.
For details, see "To select a region" (page 340).
Note
Selection of a region is not required in the shotbox,
macro, and macro attachment categories.
3
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
4
Select a package and press [OK].
To select the default package
Press the [Default Package] button.
5
In the [Package] group list, select the target file to
delete.
To select and delete multiple files, place a check mark
beside the target files to delete.
To select and delete all files, place a check mark in the
Select All checkbox.
You can also press the [Select File(s)] button and
enter a file number in the numeric keypad window.
Notes
• Selection of a file is not required in the macro
attachment category as there is only one file.
Pressing the [Search] button searches for the file
name and displays only the corresponding files.
• Searching is not available for key snapshots, wipe
snapshots, DME wipe snapshots, and macro
attachment categories.
6
Press the [Delete] button.
7
Check the message, then press [OK].
The file is deleted.

Renaming a File

Note
Files in a locked package cannot be renamed.
1
Open the Home > File > Register > Effect Timeline >
Browse Files menu (10104.14).
2
Select a region.
The regions that can be selected vary depending on
the category.
342