Editing A Macro Event - Sony MLS-X1 User Manual

For details about selecting a register, see "Selecting
a register" (page 256).
7
Press the [ENTER] button.
The created/edited macro is saved in the register, and
the [STORE STATS] button and [RCALL] button
turn on amber.
To undo saving a macro
While the [STORE STATS] button is lit amber, press and
hold the [STORE STATS] button and press the [UNDO]
button.

Editing a Macro Event

You can edit a macro event by switching the utility/
shotbox control block to effect timeline/macro edit mode.
Selecting an edit point
Move to the target event (edit point) to edit in the macro.
To move to the previous event
Press the [PREV EVENT] button in the utility/shotbox
control block.
To move to the next event
Press the [NEXT EVENT] button in the utility/shotbox
control block.
To move to a specified event number
Press the [GOTO EVENT] button in the utility/shotbox
control block, enter an event number in the numeric
keypad area of the numeric keypad control block, and
press the [ENTER] button.
Inserting an event
1
Select an edit point.
2
Perform an operation to register as an event.
When auto insert mode is enabled, the event is
inserted after the selected event automatically.
When auto insert mode is disabled, press the [INS]
button in the utility/shotbox control block to insert an
event. When you press the [INS] button, an event is
inserted after the selected event. When you press and
hold the [SHIFT] button and press the [INS] button,
the event is inserted before the selected event.
Inserting a pause event
For details about pause events, see "Pause event"
(page 305).
1
Select an edit point.
2
Press the [PAUSE] button, turning it on blue, in the
utility/shotbox control block.
3
Enter a pause time in the numeric keypad area in the
numeric keypad control block and press the [ENTER]
button.
The color of the [PAUSE] button in the utility/
shotbox control block changes to orange.
When auto insert mode is enabled, the pause event is
inserted after the selected event automatically.
When auto insert mode is disabled, press the [INS]
button in the utility/shotbox control block to insert a
pause event. When you press the [INS] button, a
pause event is inserted after the selected event. When
you press and hold the [SHIFT] button and press the
[INS] button, the event is inserted before the selected
event.
Note
When auto pause insert mode is enabled, the
[PAUSE] button operation inserts a pause event only.
Another pause event is not inserted automatically
between the pause event inserted using the [PAUSE]
button and the next event.
Modifying an event
1
Select an edit point.
2
Disable auto insert mode if it is enabled.
3
Perform an operation to register as an event.
4
Press the [MOD] button in the utility/shotbox control
block.
The selected event is modified.
Note
You can also select and modify multiple events.
For details, see "Selecting multiple events"
(page 313).
Deleting an event
1
Select an edit point.
2
Press the [DEL] button in the utility/shotbox control
block.
The selected event is deleted.
312