Editing A Macro Event - Sony MLS-X1 User Manual

For details about setting auto insert mode, see
"Setting auto insert mode" (page 307).
5
Register/edit events.
When creating a macro
Perform an operation to register as an event in a
macro.
You can also register pause events.
For details about pause events, see "Inserting a
pause event" (page 308).
When auto insert mode is enabled, events are
registered automatically.
When auto insert mode is disabled, press the [INS]
button to register an event.
Repeat the operation as required to register events.
The events are registered in the macro in the order the
operations are performed.
When editing a macro
Perform event edit operations using the buttons in the
memory recall section.
For details, see "Editing a Macro Event" (page 308).
Note
During macro creation/editing, if you press any of the
mode selection buttons in the Flexi Pad control block
other than the [MCRO] button, the executed
operation is also registered as an event.
6
Press the [STORE XXX] button ("XXX" is the
number of the currently selected register).
The macro is saved in the register.
To exit macro creation/editing without saving
Press the [EXIT] button.
Deleting a macro
1
Press the [MCRO] button.
The [MCRO] button is lit amber, and the memory
recall section switches to macro operation mode.
2
Select a bank.
For details about selecting a bank, see "Selecting a
bank" (page 307).
3
Press and hold the [DEL] button and press the button
for the target register to delete.

Editing a Macro Event

Selecting an edit point
Move to the target event (edit point) to edit in the macro.
To move to the previous event
Press the [<< PREV] button.
To move to the next event
Press the [>> NEXT] button.
Inserting an event
1
Select an edit point.
2
Perform an operation to register as an event.
When auto insert mode is enabled, the event is
inserted after the selected event automatically.
When auto insert mode is disabled, press the [INS]
button to insert the event.
Inserting a pause event
For details about pause events, see "Pause event"
(page 305).
1
Select an edit point.
2
Press the [PAUSE] button.
The memory recall section switches to numeric
keypad mode.
3
Enter a pause time and press the [ENTER] button.
When auto insert mode is enabled, the pause event is
inserted after the selected event automatically.
When auto insert mode is disabled, press the [INS]
button to insert the pause event.
Note
When auto pause insert mode is enabled, the
[PAUSE] button operation inserts a pause event only.
Another pause event is not inserted automatically
between the pause event inserted using the [PAUSE]
button and the next event.
Modifying an event
1
Select an edit point.
2
Disable auto insert mode if it is enabled.
3
Perform an operation to register as an event.
308