Setting A Graphic - Sony MLS-X1 User Manual

Grid
Displays a grid on the monitor screen. It is enabled when
setting the position of an image in two-dimensional space.
Scale (reduced display)
The size is reduced to display the range that is not
displayed on the normal monitor screen. This allows you
to check the position of an image in a larger space. The
range displayed on a normal monitor screen is indicated
by a frame.
Range displayed on
normal monitor screen
Automatically erasing the graphics display
This automatically erases the graphics display when an
effect timeline is executed. You can set the timing for
when to redisplay graphics after the effect timeline has
completed.

Setting a Graphic

This section describes the menu for DME channel 1 as an
example.
1
Open the Home > DME > Channel1 > Input/Output >
Graphic menu (15101.04).
2
Set the [Graphic] button to the on state.
3
In the [Graphic Type] group, select a type of graphic.
Axis: Coordinate axes
Axis Name: Axis names
Ch ID: Channel ID
Wire Frame: Wire frame
Grid: Grid
To reduce the display size of graphics display
Set the [Scale] button to the on state and set the following
parameter.
No.
1
To automatically erase the graphics display
when an effect timeline is executed
Set the [Auto Erase] button to the on state and set the
following parameter.
No.
1
Wire frame
204
Parameter Adjustment
Scale Degree of scale reduction
Parameter Adjustment
Recover Time Time for redisplaying graphics
after an effect timeline has
completed