Video Operations; Recalling Video; Playing Video - Sony MLS-X1 User Manual

Video Operations

This section describes the operation on clip player output
channel 1 (Clip 1) as an example.

Recalling Video

1
Open the Home > Clip Player > Clip1/Clip2 > Clip >
Recall menu (14101.11).
Content can be displayed in list view or thumbnail
view.
The clip player output channels are shown on the left.
To enable group mode
Set the [Group Mode] button to the on state.
When group mode is enabled, the clip player output
channel display changes to [Clip 1/Clip 2].
2
Select [Clip 1].
3
Select content to recall.
The selected content is recalled and displayed on the
clip player output channel.
Note
When group mode is disabled for clip player output
channels and combined content is selected, only
content 1 of the combined content is recalled on clip
player output channel 1.

Playing Video

Playback of video content recalled on a clip player output
channel can be controlled using the menu or device
control block.
Notes
• Playback of all video content (MOV files, MP4 files) is
not guaranteed.
• Before using video content on-air, always play the
content from start to finish to confirm it can be played
back correctly.
• Before checking the playback, save a backup of
important video content on a computer or on external
media connected to a computer.
• If you set a playback start point, playback stop point, or
set repeat playback during playback, the playback
stops.
Playing video (menu)
1
Open the Home > Clip Player > Clip1/Clip2 > Clip >
Play menu (14101.12).
When group mode is enabled, the clip player output
channel display changes to [Clip 1/Clip 2].
2
Control the video using the operation buttons for
[Clip 1].
Video playback operations
a
e f
a Playback start point
You can enter a playback start point in the numeric
keypad window.
b Current playback position
You can enter a playback position in the numeric keypad
window to move to that position.
To set the playback position, set the following parameter.
No. Parameter
1 Clip 1 Current
c Repeat (loop) playback
When repeat playback is set, a loop icon and the number
of repetitions are displayed.
d Playback stop point
You can enter a playback stop point in the numeric
keypad window.
e Start of video content
f Playback operation buttons
Button Operation
Move to start of video content
Move to video playback start point
191
b c d
Adjustment
Current playback position
g