Device Control Block (Joystick) - Sony MVS-8000 User Manual

Device Control Block (Joystick)

The joystick type device control block is
used for three-dimensional transform
operations using a DME.
STOP
EFF
NEXT
LOOP
KF
NORM
REV
/REV
RE
WIND
RUN
3 MENU button
a Operating buttons
The functions of these buttons are
equivalent to the functions in three-
dimensional transform operation mode of
the operating buttons of the trackball type
device control block.
Note
To select a required DME channel, use the
region selection buttons in the numeric
keypad control block.
Use of the SHIFT button
Pressing a button in the device control
block while holding down the [SHIFT]
button enables the shifted function of the
button. Also, pressing a button in the
keyframe control block while holding down
1 Operating buttons
EDIT KF EFF CONST
DELAY
ENBL DUR DUR DUR
FROM
COPY PASTE DEL UNDO
TO
GOTO PREV NEXT
INS MOD
KF/TC KF KF
MENU LOCAL GLB SRC TRGT
ASP
AXIS LOC LOC
SKEW ROT
LOC SIZE XYZ
PERS
CLR
SHIFT WORK X Y Z
BUFR
the [SHIFT] button enables the shifted
function of the button.
About the [CLR WORK BUFR] (clear
work buffer) button
When [M/E-1] or [P/P] is selected along in
the numeric region selection buttons of the
keypad control block, press this button
twice in rapid succession to reset all
parameters of the selected M/E or P/P to
their initial values. When a DME channel is
selected in the region selection buttons, the
operation is the same as when using a
trackball type device control block in the
three-dimensional transform operation
mode .
Names and Functions of Parts of the Control Panel
2 Joystick
KF
PAUSE
LOOP
RUN
CTRL
CTR
251