Loading A File - Sony MLS-X1 User Manual

Categories Level 4 > level 5
Macro attachment Macro Attachment >
Load
Macro Attachment >
Save
Macro Attachment >
Copy
Macro Attachment >
Browse Files
This section describes the menu for effect timeline
register data as an example.

Loading a File

You can select files from a package to load into registers.
Notes
• Files in categories where loading is locked cannot be
loaded.
• Files cannot be loaded into a locked register.
1
Open the Home > File > Register > Effect Timeline >
Load menu (10104.11).
The name of the most recently loaded package and
the free space in storage are displayed at the top right.
2
Select a region.
The regions that can be selected vary depending on
the category.
For details, see "To select a region" (page 340).
Note
Selection of a region is not required in the shotbox,
macro, and macro attachment categories.
3
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
4
Select a package and press [OK].
To select the default package
Press the [Default Package] button.
5
In the [Package] group list, select the target file to
load.
To select and load multiple files, place a check mark
beside the target files to load.
To select and load all files, place a check mark in the
Select All checkbox.
You can also press the [Select File(s)] button and
Menu
enter a file number in the numeric keypad window.
number
10104.81
Notes
10104.82
• Selection of a file is not required in the macro
attachment category as there is only one file.
10104.83
Pressing the [Search] button searches for the file
name and displays only the corresponding files.
10104.84 • Searching is not available for key snapshots, wipe
snapshots, DME wipe snapshots, and macro
attachment categories.
6
In the [Switcher] group list, select a load destination
register.
When multiple files are selected, select the first load
destination register.
You can also press the [Select Destination] button
and enter a register number in the numeric keypad
window.
The load destination of the first file selected in the
[Package] group is the first register selected in the
[Switcher] group, and the subsequent registers in the
[Switcher] group in the same relative positions as the
selected files in the [Package] group become load
destinations. The first register in the [Switcher] group
is shown in light blue, and the subsequent load
destination registers are shown in blue gray.
Notes
• Selection of a register is not required in the macro
attachment category.
Pressing the [Search] button searches for the
register name and displays only the corresponding
registers.
• Searching is not available for key snapshots, wipe
snapshots, DME wipe snapshots, and macro
attachment categories.
7
Press the [Load] button.
8
Check the message, then press [OK].
The files are loaded into the registers.
To display the register view/edit menu
A list of registers is displayed in the [Switcher] group.
Press the [Browse Multi Region] button to recall the
register view/edit menu for each category.
For the effect timeline category, the Home > Register >
Effect Timeline > Edit Register > Browse Multi Rgn
menu (18301.31) is recalled.
Note
For the key snapshot, wipe snapshot, DME wipe
snapshot, shotbox, and macro categories, press the
339