Setting Mono; Setting A Mosaic; Setting A Mask - Sony MLS-X1 User Manual

No. Parameter
2 Mix C
3 Mix All
3
Press the [Sepia Color] button and set the sepia color
using the following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue

Setting Mono

Note
Enabling Mono disables Sepia if it is set.
1
Open the Home > DME > Channel1 > Video Modify
> Color Modify menu (15101.32).
2
Set the [Mono] button to the on state.

Setting a Mosaic

1
Open the Home > DME > Channel1 > Video Modify
> Mosaic menu (15101.33).
2
Set the [Mosaic] button to the on state and set the
following parameters.
No. Parameter
1 Size
2 Aspect

Setting a Mask

You can mask out part of a Defocus, Sepia, Mono, or
Mosaic effect.
Separate masks can be set for group 1 effects (Sepia,
Mono, Mosaic) and group 2 effects (Defocus).
Adjustment
Chrominance signal mix
amount
Simultaneous adjustment of
luminance signal and
chrominance signal mix
amounts
Adjustment
Luminance
Saturation
Hue
Adjustment
Tile size
Tile aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.
Note
If a border has been set and then masks are enabled on
both group 1 effects and group 2 effects, the Border effect
will also be masked.
1
Open the Home > DME > Channel1 > Video Modify
> Mask menu (15101.34).
2
In [Effect Group], set the [Mask] switch for the target
effect to the on state.
Group 1: Sepia, Mono, and Mosaic effects
Group 2: Defocus effect
3
Press the [Position/Size] button and set the mask
pattern using the following parameters.
No. Parameter
1 H
2 V
3 Size
4 Soft
5 Pattern
Note
The mask patterns are the same as wipe pattern
numbers 21, 24, and 304.
To set the aspect ratio of a mask pattern
(Aspect)
Press the [Aspect] button and set the following parameter.
No. Parameter
1 Aspect
To rotate a mask pattern
In the [Rotation] group, select a rotation type.
Angle: Incline a pattern at a fixed angle.
Speed: Rotate a pattern at a fixed speed.
When the [Angle] button is selected, set the following
parameter.
No. Parameter
1 Angle
208
Adjustment
Horizontal position
Vertical position
Size
Softness
Pattern number (21, 24, 304)
Adjustment
Aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.
Adjustment
Inclination angle of pattern
• A value of –1.00 corresponds to
a rotation of one turn
counterclockwise.
• A value of +1.00 corresponds to
a rotation of one turn clockwise.
• A value of 0.00 corresponds to
no rotation.