Setting A Link Table - Sony MLS-X1 User Manual

6
Press the [Matrix No.] button and select a matrix (1 to
8) to set from the pull-down list.
7
Press the [Linked Destination] button and enter a link
destination address in the numeric keypad window.
You can set up to 128 addresses from the first
destination address of a matrix.
To delete a bus setting
Select the target link number to delete and press the
[Clear] button.

Setting a Link Table

You can set a source that links to a V/K pair number for
each matrix.
1
Open the Home > Setup > Link > External Bus Link
> Table Source Assign menu (19107.53).
2
Display the target matrix to set.
Select a tab to change the matrix to display.
3
Select the target logical V/K pair number to set.
4
Press the [Source] button and enter a source address
in the numeric keypad window.
You can set up to 128 addresses from the first source
address of a matrix.
To return a link table to the initial settings
Press the [Initialize Table] button, check the message,
then press [OK].
444