Executing A Macro; Executing A Macro (Flexi Pad Control Block) - Sony MLS-X1 User Manual

2
In the [Edit Macro Event] window, press the [Merge]
button.
3
Enter the number of a register to merge in the numeric
keypad area.
4
Press [Enter].
All events in the register are inserted after the selected
position.
Undoing an edit operation
To undo an operation immediately after inserting,
modifying, or pasting an event, press the [Undo] button in
the [Edit Macro Event] window.

Executing a Macro

You can execute a macro using the Flexi Pad control
block, utility/shotbox control block, utility control block,
cross-point control block, or numeric keypad control
block.
On the utility/shotbox control block, utility control block,
and cross-point control block, use buttons assigned with
the macro register recall function.
For details about assigning a function, see "Assigning a
Utility Function" (page 405).
Executing a Macro (Flexi Pad
Control Block)
You can recall a macro register and execute a macro on
the Flexi Pad control block in macro operation mode.
The macro execution operation varies depending on the
execution mode.
For details about the execution mode, see "Macro
execution mode" (page 305).
Notes
• Multi mode is disabled if a macro register is recalled
using the Flexi Pad control block. Only one macro can
be executed at a time.
For details about multi mode, see "Executing multiple
macros simultaneously (multi mode)" (page 305).
• If the same macro or another macro is recalled during
macro execution or when the macro is stopped, the
operation varies depending on the settings.
For details about settings, see "Setting the Macro
Mode" (page 421).
• Events registered in a macro are executed according to
the setup and the device configuration in force when the
events were registered. If the state has changed since
registration, the contents of the macro may not be
reproduced correctly when the macro is recalled.
• When executing a macro, if you switch to macro edit
mode, the macro currently being executed stops.
• A macro cannot be executed while creating/editing a
macro.
Executing a macro in normal execution
mode
1
Press the [MCRO] button.
The [MCRO] button is lit amber, and the memory
recall section switches to macro operation mode.
318