Color Backgrounds; Overview; Setting A Color Background - Sony MLS-X1 User Manual

Note
The enable/disable setting is applied to all link groups.
1
Open the Home > Other Effects > Aux Bus > Aux
Bus CCR menu (18102.21).
2
Set the [Link Enable] button in the [Aux Bus CCR
Link] group to the on state.
To disable a link group, set the [Link Enable] button
to the off state.
To apply the same settings to color correctors in
a group
If the settings of AUX bus color correctors within a group
are different, you can set the same settings by copying the
settings of a specific AUX bus.
Select an AUX bus and press the [Copy in Link Group]
button in the [Aux Bus CCR Link] group.
The color corrector of all AUX buses in the group are set
to the same settings as the selected AUX bus.

Color Backgrounds

Overview

A color background is a function used to create a color
background image using a color signal generated by a
dedicated generator.
When the system signal format is 2160P, one color
background (color background 1) can be used. When the
system signal format is 1080P or 1080i, two color
backgrounds (color background 1 and color background
2) can be used.
Assign color background 1 and color background 2 to
cross-point buttons, and select color background signals.
Types of color backgrounds
You can set a single color (color 1 only) or a color mix
(mix of color 1 and color 2) color background.
In a color mix, color 1 and color 2 are mixed using a
dedicated pattern. You can also add modifiers to the
pattern.

Setting a Color Background

This section describes the color background 1 menu as an
example.
Setting a single color background
1
Open the Home > Other Effects > Color Bkgd >
Color Bkgd1 menu (18101.11).
2
Set the [Flat Color] button in the [Matte] group to the
on state and set the following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
Setting a color mix color background
1
Open the Home > Other Effects > Color Bkgd >
Color Bkgd1 menu (18101.11).
2
Set the [Mix Color] button in the [Matte] group to the
on state and set the following parameters.
No. Parameter
1 Size
243
Adjustment
Luminance
Saturation
Hue
Adjustment
Pattern size