Removing The Virtual Image; Setting A Border - Sony MLS-X1 User Manual

No. Parameter
1 Rotation X
4 Perspective
When the [Y] button is selected, set the following
parameters.
No. Parameter
2 Rotation Y
5 Perspective
Rotating a key (key control block)
1
Press the [M/E-1] button, turning it on.
2
Press the [KEY1] button, turning it on.
3
Press the [RSZR] button, turning it on.
4
Select the rotation direction for the key.
Press the page selection button to display page 2/3 of
the setting buttons.
Select the rotation direction using the following
buttons.
[ROT X] button: Rotation in horizontal direction
[ROT Y] button: Rotation in vertical direction
When the [ROT X] button is selected, set the
following parameters.
No. Parameter
1 ROT X
4 PERS
When the [ROT Y] button is selected, set the
following parameters.
No. Parameter
2 ROT Y
4 PERS

Removing the Virtual Image

When the perspective of an image is changed, portions
beyond the virtual viewpoint may be displayed wrapped
around on the monitor screen (virtual image). You can
make a setting so the virtual image portions are not
displayed.
Adjustment
Rotation in horizontal
direction
Viewpoint position
(perspective)
Adjustment
Rotation in vertical direction
Viewpoint position
(perspective)
Adjustment
Rotation in horizontal
direction
Viewpoint position
(perspective)
Adjustment
Rotation in vertical direction
Viewpoint position
(perspective)
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Resizer Adjust/DME Select menu (11101.41).
2
Set the [Resizer] button to the on state.
3
Set the [Wrap Around] button to the on state.
The virtual image portions are removed.

Setting a Border

Setting a border (menu)
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Resizer Adjust/DME Select menu (11101.41).
2
Set the [Resizer] button to the on state.
3
Set the [Border] button to the on state and set the
following parameters.
No. Parameter
1 H
2 V
3 All
4 Density
4
In the [Border Mode] group, select a type of border.
Flat Color: Single color border
Beveled Light Edge: Beveled light edge (border like
an illuminated picture frame)
Beveled Color Edge: Beveled color edge (border
like a colored picture frame)
When the [Flat Color] button is selected, set the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
When the [Beveled Light Edge] button is selected, set
the following parameters.
No. Parameter
1 Top
2 Left
3 Right
140
Adjustment
Simultaneous adjustment of
border width of left and right
edges
Simultaneous adjustment of
border width of top and
bottom edges
Simultaneous adjustment of
border width of top, bottom,
left, and right edges
Density of border
Adjustment
Luminance
Saturation
Hue
Adjustment
Position of top edge
Position of left edge
Position of right edge