Device Control Block (Joystick) - Sony MVS-6000 User Manual

Device Control Block (Joystick)

The joystick type device control block is
used for three-dimensional transform
operations using a DME.
EFF
LOOP
NORM
/REV
WIND
RUN
a Operating buttons
The functions of these buttons are
equivalent to the functions in three-
dimensional transform operation mode of
the operating buttons of the trackball type
device control block.
Note
To select a required DME channel, use the
region selection buttons in the numeric
keypad control block.
Use of the SHIFT button
Pressing a button in the device control
block while holding down the [SHIFT]
button enables the shifted function of the
button. Also, pressing a button in the
keyframe control block while holding down
42
Names and Functions of Parts of the Control Panel
1 Operating buttons
STOP
EDIT KF EFF
NEXT
ENBL DUR DUR
KF
REV COPY PASTE DEL
GOTO
INS MOD
KF/TC
RE
MENU LOCAL GLB
ASP
AXIS LOC
SKEW
LOC SIZE
PERS
CLR
SHIFT WORK X
BUFR
3 MENU button
2 Joystick
CONST KF
DELAY PAUSE
DUR LOOP
FROM RUN
UNDO
TO CTRL
PREV NEXT
KF KF
SRC TRGT
LOC
ROT
XYZ
Y Z CTR
the [SHIFT] button enables the shifted
function of the button.
About the [CLR WORK BUFR] (clear
work buffer) button
When [M/E-1] or [P/P] is selected along in
the numeric region selection buttons of the
keypad control block, press this button
twice in rapid succession to reset all
parameters of the selected M/E or P/P to
their initial values. When a DME channel is
selected in the region selection buttons, the
operation is the same as when using a
trackball type device control block in the
three-dimensional transform operation
mode.